Type A Short-Bus Pick

Thomas Minotour dimensions

Thomas Built Buses · Front engine · Current platform · OEM verified

A current Type A cutaway body offered on Ford and GM chassis. It is much easier to park and generally less intimidating to operate, but chassis-specific engines, transmissions, wheelbases, tires and payload ratings must be separated.

Design this bus → Compare with another bus

Dimensions

Overall length20–25 ft
Buildable interior length12–17.5 ft
Buildable floor area72–112 sq ft
Standing volume430–670 cu ft
Interior width88 in
Interior height74 in
Exterior width96 in
Overall height108–118 in
Wheelbases138", 139", 158", 159"
GVWRup to 14500 lb

Drivetrain & chassis

TiresFord or GM cutaway tire package; verify chassis placard
BrakesHydraulic chassis brakes
SuspensionFord or GM cutaway chassis suspension
FuelChassis-specific
Axle ratioChassis and order specific

Configurations

138″ wheelbase about 20–22 ft
158″ wheelbase about 23–25 ft

Strengths and cautions

Works in its favour

  • Compact footprint and easier parking
  • Ford and GM service familiarity
  • Useful for solo or couple layouts
  • Lower entry height than many full-size buses

Check before you buy

  • Payload can be consumed quickly by tanks and heavy finishes
  • Interior width and headroom vary by body/chassis specification
  • Wheel wells dominate a larger share of the floor
  • Ford and GM versions must not be merged into one drivetrain record

Will a bed fit crosswise?

Interior width is about 88 inches before framing and panelling.

Twin crosswise (75″) Fits, about 13″ spare
Full / double crosswise (75″) Fits, about 13″ spare
Queen crosswise (80″) Fits, about 8″ spare
King crosswise (80″) Fits, about 8″ spare

Similar platforms

Figures here come from manufacturer documentation, but bodies were ordered to spec, so two vehicles of the same model year can still differ. Measure before you buy materials.
← All buses